Epic Hygiene BIOLASE Laser

Epic Hygiene BIOLASE Laser

Hemostasis and coagulation
• Treatment of canker sores, herpetic and aphthous ulcers of the oral mucosa
• Laser removal of diseased, infected, inflamed and necrosed soft-tissue within the periodontal pocket
• Sulcular debridement (removal of diseased, infected, inflamed and necrosed soft-tissue in the periodontal
pocket to improve clinical indices including gingival index, gingival bleeding index, probe depth,
attachment loss and tooth mobility).
• Laser soft-tissue curettage

Epic Hygiene BIOLASE Laser
TREATMENT, TECHNIQUE, AND SETTINGS
Use your clinical judgment to determine all aspects of treatment including, but not limited to, the laser
treatment protocol, technique, power settings, pulse duration and interval settings, mode of operation, as
well as the accessories utilized (e.g. tip type) and other procedural requirements. Closely observe and
monitor clinical effects and use your judgment to determine the clinical parameters and approach for the
treatment. Make appropriate power, pulse length, and interval adjustments to compensate for varying
tissue compositions, density, and thickness. Always start treatment at the lowest power setting for the
specific indication and increase as required. BIOLASE assumes no responsibility for parameters,
techniques, methods or results.
CLINICAL ENVIRONMENT
Only use this device in clinical environments that observe proper standard aseptic techniques with all oral
procedures.

Epic Hygiene BIOLASE Laser

Specifications

1 GENERAL
• Dimension (W x L x H)
• Weight
2 ELECTRICAL
• Operating voltage
• Frequency
• External Fuses
• Main control
• Remote Interruption
• Disable Control
• Battery
• DC Power Supply Module
3 LASER
• Laser Classification
• Medium
• Wavelength
• Max Power Output
• Power Accuracy
• Operating Modes
• Fiber Tip Diameter
• Pulse Duration
• Pulse Interval
• Pulse Repetition Rate
• NOHD (Nominal Ocular Hazard Distance)
• MPE (Maximum Permissible Exposure)
• Beam Divergence
• Standard Fiber Cable Length
4 OTHER LIGHT SOURCES
• Aiming Beam
4 Specifications
5.7 in x 6.5 in. x 4.4 in (14.5 cm x 11.2 cm x 16.5 cm)
2.5 lbs / 1kg
100V – 240V ~ at 1.5A
50 / 60 Hz
None
Main Power Switch (ON/OFF Control Button)
Remote interlock
Emergency Stop Button
Lithium Ion Rechargeable, 14.4V, 2.9Ah
12V DC, 5A
IV (4)
InGaAs Semi-conductor diode
980 ± 10nm
1.5W Max Average Power, 10W Max Peak Power
± 20%
Continuous, Pulse Modulation
400µm
0.01ms – 20ms
0.04ms – 20ms
Up to 20kHz (for reference)
2.71 meters
30W/m2
8 – 22° per side
5 feet (1.5 meters)
Laser diode, max 1 mW, 625 nm – 670 nm, Class 2